Previous: crypt, Up: Cryptographic Functions

The Data Encryption Standard is described in the US Government Federal Information Processing Standards (FIPS) 46-3 published by the National Institute of Standards and Technology. The DES has been very thoroughly analyzed since it was developed in the late 1970s, and no new significant flaws have been found.

However, the DES uses only a 56-bit key (plus 8 parity bits), and a machine has been built in 1998 which can search through all possible keys in about 6 days, which cost about US$200000; faster searches would be possible with more money. This makes simple DES insecure for most purposes, and NIST no longer permits new US government systems to use simple DES.

For serious encryption functionality, it is recommended that one of the many free encryption libraries be used instead of these routines.

The DES is a reversible operation which takes a 64-bit block and a 64-bit key, and produces another 64-bit block. Usually the bits are numbered so that the most-significant bit, the first bit, of each block is numbered 1.

Under that numbering, every 8th bit of the key (the 8th, 16th, and so on) is not used by the encryption algorithm itself. But the key must have odd parity; that is, out of bits 1 through 8, and 9 through 16, and so on, there must be an odd number of `1' bits, and this completely specifies the unused bits.

— Function: void **setkey** (`const char *key`)

The

`setkey`

function sets an internal data structure to be an expanded form ofkey.keyis specified as an array of 64 bits each stored in a`char`

, the first bit is`key[0]`

and the 64th bit is`key[63]`

. Thekeyshould have the correct parity.

— Function: void **encrypt** (`char *block, int edflag`)

The

`encrypt`

function encryptsblockifedflagis 0, otherwise it decryptsblock, using a key previously set by`setkey`

. The result is placed inblock.Like

`setkey`

,blockis specified as an array of 64 bits each stored in a`char`

, but there are no parity bits inblock.

— Function: void **setkey_r** (`const char *key, struct crypt_data * data`)

— Function: voidencrypt_r(char *block, int edflag, struct crypt_data * data)

These are reentrant versions of

`setkey`

and`encrypt`

. The only difference is the extra parameter, which stores the expanded version ofkey. Before calling`setkey_r`

the first time,`data->initialized`

must be cleared to zero.

The `setkey_r`

and `encrypt_r`

functions are GNU extensions.
`setkey`

, `encrypt`

, `setkey_r`

, and `encrypt_r`

are
defined in `crypt.h`.

— Function: int **ecb_crypt** (`char *key, char *blocks, unsigned len, unsigned mode`)

The function

`ecb_crypt`

encrypts or decrypts one or more blocks using DES. Each block is encrypted independently.The

blocksand thekeyare stored packed in 8-bit bytes, so that the first bit of the key is the most-significant bit of`key[0]`

and the 63rd bit of the key is stored as the least-significant bit of`key[7]`

. Thekeyshould have the correct parity.

lenis the number of bytes inblocks. It should be a multiple of 8 (so that there is a whole number of blocks to encrypt).lenis limited to a maximum of`DES_MAXDATA`

bytes.The result of the encryption replaces the input in

blocks.The

modeparameter is the bitwise OR of two of the following:

`DES_ENCRYPT`

- This constant, used in the
modeparameter, specifies thatblocksis to be encrypted.`DES_DECRYPT`

- This constant, used in the
modeparameter, specifies thatblocksis to be decrypted.`DES_HW`

- This constant, used in the
modeparameter, asks to use a hardware device. If no hardware device is available, encryption happens anyway, but in software.`DES_SW`

- This constant, used in the
modeparameter, specifies that no hardware device is to be used.The result of the function will be one of these values:

`DESERR_NONE`

- The encryption succeeded.
`DESERR_NOHWDEVICE`

- The encryption succeeded, but there was no hardware device available.
`DESERR_HWERROR`

- The encryption failed because of a hardware problem.
`DESERR_BADPARAM`

- The encryption failed because of a bad parameter, for instance
lenis not a multiple of 8 orlenis larger than`DES_MAXDATA`

.

— Function: int **DES_FAILED** (`int err`)

This macro returns 1 if

erris a `success' result code from`ecb_crypt`

or`cbc_crypt`

, and 0 otherwise.

— Function: int **cbc_crypt** (`char *key, char *blocks, unsigned len, unsigned mode, char *ivec`)

The function

`cbc_crypt`

encrypts or decrypts one or more blocks using DES in Cipher Block Chaining mode.For encryption in CBC mode, each block is exclusive-ored with

ivecbefore being encrypted, thenivecis replaced with the result of the encryption, then the next block is processed. Decryption is the reverse of this process.This has the advantage that blocks which are the same before being encrypted are very unlikely to be the same after being encrypted, making it much harder to detect patterns in the data.

Usually,

ivecis set to 8 random bytes before encryption starts. Then the 8 random bytes are transmitted along with the encrypted data (without themselves being encrypted), and passed back in asivecfor decryption. Another possibility is to setivecto 8 zeroes initially, and have the first the block encrypted consist of 8 random bytes.Otherwise, all the parameters are similar to those for

`ecb_crypt`

.

— Function: void **des_setparity** (`char *key`)

The function

`des_setparity`

changes the 64-bitkey, stored packed in 8-bit bytes, to have odd parity by altering the low bits of each byte.

The `ecb_crypt`

, `cbc_crypt`

, and `des_setparity`

functions and their accompanying macros are all defined in the header
`rpc/des_crypt.h`.